MCD
2013-05-13, 04:27 PM
Parsiduoda Jl audio e4300 ir a4300 stiprintuvai, e4300 čiut pasitrynęs, o a4300 kaip naujas
e4300 - 380lt
a4300 - 420lt
Vilnius, Kaunas, Kėdainiai 865321420
abu yra identiški tik skiriasi korpuso išvaizda:
4-channel car amplifier
70 watts RMS x 4 at 4 ohms (110 watts RMS x 4 at 2 ohms) at 14.4 volts
45 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) at 12.5 volts
220 watts RMS x 2 at 14.4 volts (150 watts RMS x 2 at 12.5 volts) at 4 ohms
differential-balanced inputs
Advanced Rollback Protection System
variable high- and low-pass filter (50-200 Hz, 12 dB/octave)
switchable bass boost (0, 6 dB at 48 Hz)
optional wired remote bass boost
Absolute Symmetry™ Class-AB amplifier design
MOSFET power and output stages
preamp-level inputs
speaker-level input with optional converter (http://www.crutchfield.com/S-YlpN6SWtJh7/App/Product/Item/Main.aspx?I=136XDCLR2S)
preamp outputs
4-gauge power and ground leads and a 40-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 40-amp in-line fuse between the distribution block and the amplifier is recommended
14-3/16"W x 2-1/2"H x 9-5/16"D
e4300 - 380lt
a4300 - 420lt
Vilnius, Kaunas, Kėdainiai 865321420
abu yra identiški tik skiriasi korpuso išvaizda:
4-channel car amplifier
70 watts RMS x 4 at 4 ohms (110 watts RMS x 4 at 2 ohms) at 14.4 volts
45 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) at 12.5 volts
220 watts RMS x 2 at 14.4 volts (150 watts RMS x 2 at 12.5 volts) at 4 ohms
differential-balanced inputs
Advanced Rollback Protection System
variable high- and low-pass filter (50-200 Hz, 12 dB/octave)
switchable bass boost (0, 6 dB at 48 Hz)
optional wired remote bass boost
Absolute Symmetry™ Class-AB amplifier design
MOSFET power and output stages
preamp-level inputs
speaker-level input with optional converter (http://www.crutchfield.com/S-YlpN6SWtJh7/App/Product/Item/Main.aspx?I=136XDCLR2S)
preamp outputs
4-gauge power and ground leads and a 40-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 40-amp in-line fuse between the distribution block and the amplifier is recommended
14-3/16"W x 2-1/2"H x 9-5/16"D