O čia radau forume kažkokiam, nežinau ar tiesa, bet įdomu:
Original specs:
Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20 kHz)
Per Channel into 4 ohms - 100W - 0.08% THD
Per Channel into 2 ohms - 200W - 0.3% THD
Bridged into 4 ohms - 400W - 0.3% THD
Dynamic Power (at 14.4V, 20 Hz to 20 kHz)
Per Channel into 4 ohms - 150W - 0.08% THD
Per Channel into 2 ohms - 300W - 0.3% THD
Bridged into 4 ohms - 600W - 0.3% THD
Frequency Response - 8 Hz to 60 kHz - (+0, -1 dB)
Signal-to-Noise Ratio - 105 dBA - (referenced to rated power)
Slew factor - Greater than 5
Input Sensitivity (for rated power ouput) - 200mV to 4.0V (1.0V a center detent)
Input Impedance - 10k ohms
Speaker Impedance - 4 or 2 ohms (Stereo), 4 ohms (Bridged)
Active Dividing Network Frequency and Slope - 50 to 200 Hz, 12 dB per octave
Power Requirement - 11 - 16VDC Negative Ground
Dimensions (W x H x D) - 240mm x 53mm x 330mm (9-7/16" x 2-16" x 13")
Weight - 4.2 kg (9lbs. 4 oz)
THIS IS WHAT A COUPLE OTHER MRV-1000's WERE ACTUALLY TESTED AT.
Bookmarks