Characteristics:
• Stably at 2 ohms ,
• Variable deep and high-pass 40-300 cycles per second (12dB per oktave),
• Variable bass Boost 0... 12 railways with 45 cycles per second ,
• Niederpegelausgaenge for grinding through further amplifiers,
• Bridging/tri mode enterprise,
• Channel mode choice switch (4/3/2/1 - depending upon model),
• Protective circuit against short-circuit,
• DC voltage offset and temperature rise,
• Operational status indicator (LED becomes green ) and overload announcement (red LED )
Technical data:
• Max one. Power output (sine Burst 2:8, 1 kHz ) at 4 ohms , 14.4 V 2 x 160 Watts / 1 x 500 Watts
• Rated output (DIN 45,324) at 4 ohms , 14.4 V 2 x 65 Watts / 1 x 200 Watts
• Max one. Power output (sine Burst 2:8, 1 kHz) at 2 ohms , 14.4 V 2 x 250 W
• Rated output (DIN 45,324) at 2 ohms , 14.4 V 2 x 100 W
• Frequency response 5 cycles per second - 50 kHz (-3 railways)
• Distortion factor < 0,05 % (1 kHz )
• Weighted signal-to-noise ratio (A-filter) > 100 railways
• Entrance sensitivity 0.25 V - 4 V
• Feed impedance 20 kOhm
• Current supply 12 V minus at mass
• Dimensions (BxHxT) 221 mm x 48 mm x 253 mm
• Weight 2.35 kg
Characteristics:
• Band-pass filter Subwoofer with stable plexiglass cover
• Flowoptimized bass reflex pipes
• Screwing terminal
• 250/300 mm of high speed drivers with pole core drilling
• Resonance-poor steel basket with additional moving coil ventilation
• Skid-proof covering
Technical data:
• Principle/DIN Ø 2 x 250 mm band-pass filter,
• Housing Subwoofer
• Nominal/music maximum stress 2 x 100/300 Watts - 600 Watts
• Impedance 4 ohms
• Frequency range 24 - 500 cycles per second
• Sound pressure 92 railways
• Dimensions 670 x 330 x 380/340 mm
• Weight 17 kg
109,90 EU
Car amplifier Mac audio "Z 2200".
Characteristics: Stably at 2 ohms ; Variable low-passes 50 - 250 cycles per second (12 dB/Oktave);
Variable high-passes 40 - 500 cycles per second (12 dB/Oktave);
Variable bass Boost 0... 12dB with 45 cycles per second ; Niederpegelausgaenge;
Totally enclosed current and loudspeaker clamps; Bridge/tri mode enterprise; Protective circuit against short-circuit, DC voltage offset and temperature rise;
Operational status indicator (LED becomes green ) and overload announcement (red LED );
Remote maintenance to volume the control.
Technical data:
• Max one. Power output (sine Burst 2:8, 1 kHz ) at 4 ohms , 14.4 V 2 x 400 W/1 x 200 Watts
• Rated output (DIN 45,324) at 4 ohms , 14.4 V 2 x 200 W/1 x 600 Watts
• Max one. Power output (sine Burst 2:8, 1 kHz ) at 2 ohms , 14.4 V 2 x 600 Watts
• Rated output (DIN 45,324) at 2 ohms , 14.4 V 2 x 300 Watts
• Frequency response 5 cycles per second - 50 kHz (-3 railways)
• Distortion factor < 0,05 %; Weighted signal-to-noise ratio (A-filter) < 100 dB; Entrance sensitivity 0.2 V - 5 V; Feed impedance 25 kOhm; Current supply 12 V minus at mass; Dimensions (B x H x T) 395 mm x 54 mm x 293 mm; Weight 5.45 kg;
179,90 EU
Bookmarks