Alpine MRP-T222 ar paveš komponentus?

[Alpine SPG]

Sveiki,

Patarkite ar suderinamas stiprintuvas Alpine MRP-T222 su Alpine komponentais SPG-17CS? Ar jis ne per silpnas šiems komponentams ir išgaus pilną ju galią?

Žemiau stiprintuvo ir komponentų duomenys. Ačiū!

MRP-T222

RMS Power (at 14.4V THD+N, 20Hz-200Hz)
§ Per channel into 4 ohms: 50W x 2 (0.08% THD)
§ Per channel into 2 ohms: 70W x 2 (0.3%)
§ Bridged 4 ohms: 140W x 1 (0.3%)
§ Total Max. Power: 250W
BassEngine® Sound Tuning
§ Crossover Network: 18dB/oct
§ Low/High Pass Crossover Frequency (Fixed): 80Hz
§ Subsonic Filter (Fixed): 20Hz
§ Bass EQ Frequency (Fixed): 50Hz
§ Bass EQ Level (Adjustable): 0 - 12dB
General
§ Power Requirements: 14.4V DC (11V to 16V)
§ Frequency Response: 10Hz – 50kHz (+0, -1dB)
§ Signal to Noise (S/N): 100dBA (referenced to rated power)
§ Input Sensitivity (For Rated Power): 0.2V to 4.0V
§ Slew Factor: Greater than 5
§ Input Impedance: 10k Ohm
§ Speaker Impedance: 4 or 2 Ohm (Stereo), 4 Ohm (Bridged)
§ Dimensions (WxHxD): 172mm x 60mm x 267mm
§ Dimensions (WxHxD): 6-4/5” x 2-2/5" x 10-1/2”
§ Weight: 1.95 Kg. (4 lbs. 5 oz)

SPG-17CS

Atkuriama galia
§ Didžiausia atkuriama galia (peak): 280W
§ Nominali atkuriama galia (RMS): 70W
Bendra informacija
§ Atkuriamų dažnių juosta: 68Hz – 20kHz
§ Varža: 4 Ohms
§ Jautrumas: 88.5dB / W (1m)

[Alpine SPG]

Taip suprantu, kad kvailą klausimą uždaviau, nes nematau jokių komentarų....

[KaTiS]

nu pats pagalvok, ar turėsi 14.4v mašinoj, kad gautum tuos 50w, jeigu tu nori pilnai išvešt savo SPG tau reikia bent ~60w
matai jautrumą?

[Alpine SPG]

nu pats pagalvok, ar turėsi 14.4v mašinoj, kad gautum tuos 50w, jeigu tu nori pilnai išvešt savo SPG tau reikia bent ~60w
matai jautrumą?

Supratau.... Tuomet gal sis variantas priimtinesnis mano komponentams? Arba zmones pasiulykit koki nors stipra iki 300 Lt.

Audison LR 3062
TECHNICAL DATA
POWER SUPPLY 11 ÷ 15 VDC
IDLING ABSORPTION 0.8 A
MAX ABSORPTION (Nominal Pwr) 18 A
CONT. NOMINAL POWER (Tol. +10%; -5%)
2 Ch x 4 Ohms; 0.3% THD; 12 VDC 55 W (RMS)
CONT. OUT POWER (2 Ch x 4 Ohms; 13.8 VDC) 67 W (RMS)
CONT. OUT POWER (2 Ch x 2 Ohms; 13.8 VDC) 94 W (RMS)
CONT. OUT POWER (1 Ch x 4 Ohms; 13.8 VDC) Bridge 188 W (RMS)
TRI-MODE CONNECT. (4 Ohms) 67 + 67 + 188 (W RMS - pulse)
DISTORTION - THD (1 KHz; 90% Nominal Pwr) 0.07 %
BANDWIDTH (-3 dB; Nominal Pwr) 4 Hz ÷ 70 KHz
DAMPING FACTOR (4 Ohms) 120
RISE TIME 4.5 ìS
S/N RATIO 98 dBA
INPUT SENSITIVITY 0.15V ÷ 1.5V
INPUT IMPEDANCE 15 KOhms
OUTPUT IMPEDANCE Stereo 2 - 4 - 8 Ohms
OUTPUT IMPEDANCE Mono 4 - 8 Ohms